Break's

Text

Exact  

Kefrens - Seka v3.0DetailsCaseRow
Documentation
-------------  welcome to the seka v3.0 instructions  --------------
--------------------------------------------------------------------

the seka v3.0 is based on the seka v1.5 not the seka v2.1 by mfc.
anyhow this version supports all seka v2.1 commands. the upgrade
programming was done by promax of kefrens.  this is not a course
in how to use the seka, only a upgrade instructions to the new
commands.

summary of seka v2.1 improvements supported by seka v3.0:

1. workspace:
   ----------
   pressing return by accidence when you are asked 'workspace>'
   allocates normaly ( 0 kbytes user memory ).  pressing return
   by accidence will now just repeat the question.

2. write object:
   -------------
   when writing an object code you are asked to enter a mode.
   type the letter c and your object code will allways be loaded
   into the chip-ram when loaded from the cli.  this insures that
   bitmaps and copper list will work on a machine with memory
   expansion.

3. execute:
   --------
   typeing '@' enables you to executes a command on the disk,
   like in the cli.  please note that the cli command run must
   be present in the c-directory.  you use it like this:

              seka>@
              execute>type df0:sekav3.0txt

   the output from this command is of course directed to the seka
   window !!  not like in the seka v2.1 in the amigados window.

4. >extern and y:
   --------------
   typeing the command 'y' execute all >extern commands in your
   source code.  the extern command is used in stead of the 'ri'
   command.  type in your source code:

            9  
           10  >extern "filename",start [ , length ]
           11  

               start    = where to load the file
               length   = the desired load length. if you want to
                          the intire file in its default length,
                          skip the length indication.

   the start and length pointer may be both labels and direct
   pointers or a mixture of both.  if you use labels you must
   offcourse remember to assemble before typing 'y'.

5. look in source:
   ---------------
   the 'l' command doesn't differ between lowercase and uppercase.

6.hyper fast scrolling:
   ---------------------
   press ctrl+a and you scroll up 100 lines. press ctrl+z and you
   scroll down 100 lines.


summary of seka v3.0 improvements not included in the seka v2.1:

1. copy (debugged):
   ----------------
   the line command 'c'-copy is fixed, there were a bug in
   the two way copy selection, that made the seka destroy the
   copied data.
      in earlyer seka versions pressing return accidentialy caused
   a system crash!  this error is corrected.

2. fill (debugged):
   ----------------
   like the copy command pressing return caused a systemcrash.

3. copy link file:
   ---------------
   the copy link file commando 'cl' had the same error as fill.

4. breaking seka commands:
   -----------------------
   pressing ctrl+c breaks any seka action.  in earlier seka
   versions, it was not possible to break the directory function.

5. chip, fast or abs memory:
   -------------------------
   this function enabels you to specify your program memory type.
   if you are making programs with copperlists ect. that requers
   chip-ram, type a 'c'.  if you want your code in the fast-ram
   if you got any type 'f'.  typing 'f' or just pressing return
   allocates memory as usual. (default for seka v1.5).
   these options were also avarialbe on the seka v2.1.  the new
   achevement is the abs-mem option.  typing an 'a' enables you
   to type in the address where to allocate the user memory --
   where to put your programs.

6. friendly directory:
   -------------------
   using the 'v' command waited a long time before it printed the
   directory.  this is corrected, and the names is printed out as
   soon as they are loaded, one by one.

7. assemble-optimize:
   ------------------
   the line command 'a'-assemble with the option 'o'-optimize
   specified had two bugs. before bra when optimized became br.sa
   instead of bra.s and a bra.l were not made into a bra.s to
   check if this shorter range were possible.  these errors are
   now fixed.

8. repeat last line.
   -----------------
   pressing crsr-up repeats last line like usual, but tabs are now
   repeated like a normal char.

9. write block.
   ------------
   pressing ctrl+w in the editor (write block) didn't work.  now
   this function is fixed.  mark your block as usual, in stead of
   pressing ctrl+c (cut block) press ctrl+w.  you will not be
   faced with the prompt filename>.  type a name and your block
   is saved at the disk.

10.hunt in memory:
   ---------------
   the old line command 'h' is moved and is now called '=', this
   has made space for a new command called 'h'-hunt. this is
   a hunt in memory command.  try to type:

              seka>h
              begin>$40000      (address or label)
              end>$50000        (      ----      )
              data>"hello",$a   (string in ascii or bytes seperated
                                     with:  <space> or , or + )

   if you by accidence have searched for data that occures a lot
   of times in memory.  the hunt command can be breaked by pressing
   ctrl+c.

11.print command:
   --------------
   typeing '?' in the seka v2.1 printed the hex, dec and bin value.
   now this version also prints the ascii characters.

12.pal & ntsc:
   -----------
   this version of the seka features automatic pal and ntsc selection.
   if you start up in pal the window is automatically opened at full
   256 lines.

13.edit window:
   ------------
   pressing esc activates the edit window. now a bigger edit window
   is given to you.  in pal = 22 lines ( ntsc = 19 lines ).  now
   this could cause a problem because a 'q' in memory displays 8
   lines and this bigger window deletes some of these lines.  to
   solve this problem i have given the key just below the esc key
   marked ` a new function.  pressing this key opens a smaller edit
   window pal = 13 lines ( ntsc = 10 lines ).  in the editor this
   key is back normal, so you can still use the character ` in your
   programs.

14.edit scrolling:
   ---------------
   pressing the shift together with one of the cursor keys, scroll
   the edit display one full screen up or down.  this function can
   also be achieved by pressing ctrl+e (up) or ctrl+x (down)

15.one hand editing:
   -----------------
   in the editor it is now possible to do mark-block, cut block and
   paste-block with the same hand.  ctrl+b = mark block.  ctrl+c =
   cut block.  ctrl+f or ctrl+p = fill/paste block.

16.rotating block:
   ---------------
   you have typed something, that is in exatly the wrong order. 
   (the first line should be the last ect.ect.).  mark the desired
   block and press ctrl+r to rotate this block.

17.lowercase block:
   ----------------
   mark a block and press ctrl+l.  all text is turned into lowercase.

18.uppercase block:
   ----------------
   mark block and press ctrl+u.  uppercase again.

19.copy block:
   -----------
   mark block and press ctrl+x, the block is now copyed and you can
   paste it every where.

20.delete eol:
   -----------
   press ctrl+d and the line is deleted from the cursor to the end of
   line.

21.go to top of text:
   ------------------
   press ctrl+t and you are at the top line of your source.

22.look in editor:
   ---------------
   looking with the 'l' command finds text in you source.  now this
   function can be executed while editing.  press ctrl+j in the
   editor if you want to look for the same text once more.

short summary of control commands:

                ctrl+a	; 100 lines up
                ctrl+b	; mark block
                ctrl+c	; cut block
                ctrl+d	; delete to end of lines
                ctrl+e	; one screen up
                ctrl+f	; paste block (fill)
                ctrl+j	; search for text (jump)
                ctrl+l	; lower case
                ctrl+o	; insert line
                ctrl+r	; rotate block
                ctrl+u	; upper case
                ctrl+w	; write block to disk
                ctrl+x	; one screen down
                ctrl+z	; 100 lines down
                ctrl+p	; paste block
                ctrl+[	; esc

authers note:
-------------
   in this version off the seka i have not only tryed to make new
   functions but also debugged some of the old. i have used nearly
   all the seka v2.1 functions, and improved some off them. a bigger
   edit window is given to you.  because off this more lines is 
   printed taking up more time.  the time used can be cut down using
   the cli commands add21k (onebpl) and blitzfonts before running
   the seka.

   if you have any comments to this new seka v3.0 please write to:

      kefrens,  poste restante,  3450 alleroed,  denmark


Disclaimer: Texts are presented here in their original form, control chars and all, with no edits or censorship. All texts have been already been voluntarely released to the public as a part of the demos. That said, if a text seen here contains information about you personally that you don't wish to be visible, contact me and I will remove it from the website.